Single-seat control valves are mainly used in applicati […]
Single-seat control valves are mainly used in applications where the amount of leakage is small and the pressure difference is small.
The sleeve regulating valve adopts a balanced valve core with large unbalance force, which allows large pressure difference and stable operation.
Cage regulators are especially suitable for applications that allow for small differential pressures and large differential pressures before and after the valve.
The two-seat control valve is especially used in applications where the differential pressure is large and the leakage is not critical.
Three-way regulating valve: The combined flow type is mainly used to mix two fluids into a third fluid; the split type is mainly used to divide one fluid into two fluids.
The angle control valve is especially suitable for high viscosity, fluids containing suspended solids and granular media to avoid coking, sticking and clogging.
The high temperature type regulating valve is suitable for occasions where the flow rate is large, the temperature is high, and the leakage amount is not strict.
The low temperature type regulating valve is suitable for operation below 0 to -250 °C.
The bellows type regulating valve is suitable for the regulation of extremely literate, flammable, explosive and volatile and rare precious metal media.