This series of butterfly valves are suitable to be used for industrial pipeline as two-way open-closing and regulating devices.The scope of regulation is from 4o°to 90°fully open.If the valve is one-way used,the recommended pressure direction of closing is shown on fig.
This series of butterfly valves are suitable to be used for industrial pipeline as two-way open-closing and regulating devices.The scope of regulation is from 4o°to 90°fully open.If the valve is one-way used,the recommended pressure direction of closing is shown on fig.
Features:
1.The disk is truss framed with two-plate and flow-resistent is lower.
2.It has reliable sealing structure for two-way stopping without any leakage.
3.The axle sleeves are self-lubricanted bearing. Oiling is not need and friction drag is small during operation.
4.Rubber sealing can be replaced on pipeline without removing the valve (DN>700).
5.Several kinds of actuators with reliable performance and agile operation are supplied for the liser's selection. Wear-resisting and corrosion-resisting.
MATERIALS OF MAIN PARTS
Main parts materials
Name of parts :
|
Flange butterfly valve parts material
|
Body :
|
Ductile iron |
Butterfly board :
|
Ductile iron |
Valve shaft :
|
2Crl3 stainless steel, alloy steel
|
Sealing ring :
|
Stainless steel ring
|
Filler :
|
Flexible graphite
|
Nominal pass DN (mm)
|
50~2000
|
|||
Nominal pressure FN (MPa):
|
0.6
|
1.0
|
1.6
|
2.5
|
Seal test (MFa):
|
0.66
|
1.1
|
1.76
|
2.75
|
Strength test (MPa) :
|
0.9
|
1.5
|
2.4
|
3.75
|
Applicable media:
|
carbon steel: -29 ℃ ~ 425 ℃ stainless steel: -40 ℃ ~ 650 ℃
|
|||
Applicable medium:
|
water, air, natural gas, oil and weakly corrosive fluids
|
|||
Leakage:
|
standard GB / T13927-92 standard
|
|||
Drive mode:
|
worm gear, electric, pneumatic, hydraulic
|
want to consult our sales advisor?
get a quoteTieling Water Valve CO.,Ltd Is one of the key enterprises after the former Tieling Valve Works was reformed. It is the largest low pressure big diameter valve, penstock manufacturing base